Frame 7 is assembled, just waiting for the glue to cure, then will give everything a sand and then seal it with the penetrating epoxy.
I approached this frame with some trepidation based on reading the forum and people's experience will ring nails, but I had absolutely no problems. I drill two holes, applied the glue, tapped those two about half way home. I then drill all the other nail holes, and again drove nails in all the holes about half way home. Then bashed them all the way in. Sweet as, no problems, and nothing moved.
Finally got around to getting a respirator.
Also got some thinners for the penetrating epoxy, hopefully it will makes the first coat soak in a bit better.
No comments:
Post a Comment